KP-B210 Operation Instruction Video
Operating procedure
① Connect the power cord and turn on the power switch.
② Place the treatment area on the pedestal, adjust the angle of the irradiator, and apply it to the treatment area.
③ Press the “Auto” button to start treatment.
* It is recommended to use the "Fully automatic setting mode".
(It is automatically set to 30 minutes and the intensity is also set to strong.)
How to operate
Usage time setting button
Usage time setting button
Usage time setting button
- Start: When set to manual mode, press this button to activate the device after setting the time and intensity. Auto: When set to fully automatic mode, pressing this button activates the therapy device. Stop: When using, press this button to stop the treatment device.
Button operation method mode ①: Fully automatic setting mode (short button operation)
Step 1: When you turn on the power switch, you will hear a beep and the power lamp will light.
Step 2: Press the ◯ button. The time is automatically set to 30 minutes and the intensity is also automatically set to strong. At this time, the in-use lamp on the pedestal lights up and the treatment device operates.
Button operation method mode ②: Manual setting mode (manually set time and intensity)
Step 1: When you turn on the power switch, you will hear a beep and the power lamp will light.
Step 2:
Time setting Each time you press , the display will show the time in the order below and you can set it.
10 points ➞ 20 points ➞ 30 points
Step 3:
Setting Intensity Each time you press , the intensity is displayed in the following order and can be set.
Strong ➞ Weak ➞ (Cancel)
Step 4:
After setting the start time and intensity, press . At this time, the in-use lamp on the pedestal lights up and the treatment device operates.
Notes:
If you want to change the timer and intensity settings in the middle, follow steps 2 and 3 above to set them again.